AandH dLive Demo MC3.smw (Root Demo File) Module Suite control Allen & Heath dLive series mixers. Tested with dLIve firmware V1.72 Reference: dLive-MIDI-TCP-Protocol-1.50.pdf Release: 2018-11-14 Release r0.0 Compiler Version: 3.03 Firmware Version: MC3 1.502.3493.30908 Processor: MC3 Crestron Software: Crestron Database..................: 73.02.001.00 Device Database....................: 100.07.001.00 SIMPL Windows......................: 4.10.07.00 SIMPL Windows Library..............: 508 SIMPL+ Cross Compiler..............: 1.3 *********************************************************************************** Modules (All Simpl+, Not SimplWindows): *********************************************************************************** AandH Fader Level Control-dLive r0.0.usp Controls fader levels on dLive Mixers. Parameters: ControlType: Select Input Channel, Mains, Mono Group, Stereo Group, Mono Aux, Stereo Aux, Mono Matrix, Stereo Matrix, Mono FX Send, Stereo FX Send, FX Return, and DCA. ControlChnl: Select valid range from control type in decimal format. MidiChnl: The MidiChnl to control in decimal format. Inputs: Analog- FdrLvl: Set the analog to the range of 0d~127d (00h~7Fh). Serial- FmMixer: Connect to the TCP/IP symbol receive line. Outputs: Analog- FdrLvlFb: Feedback of the level in the range of 0d~127d (00h~7Fh). This is tracked internally by the module. It is also updated when the mixer sends feedback when the control is nudged. Serial- ToMixer: Connect to the TCP/IP symbol Transmit line. Reference the dLive protocol for valid Control Channels for the selected control type. For more information Reference: dLive-MIDI-TCP-Protocol-1.50.pdf Tested with dLIve firmware V1.72 Release: 2018-11-14 Release r0.0 *********************************************************************************** *********************************************************************************** AandH Input Assign To Main Control-dLive r0.0.usp Controls setting Input Channels to Main on dLive Mixers. Parameters: ControlType: Select Input Channel, Mains, Mono Group, Stereo Group, Mono Aux, Stereo Aux, Mono Matrix, Stereo Matrix, Mono FX Send, Stereo FX Send and FX Return. ControlChnl: Select valid range from control type in decimal format. MidiChnl: The MidiChnl to control in decimal format. Inputs: Digital- ChannelOn/Off/Toggle: Pulse to turn channel on/off or toggle state. Serial- FmMixer: Connect to the TCP/IP symbol receive line. Outputs: Digital- ChannelOnFb/OffFb: Channel Feedback. This is tracked internally by the module. It is also updated when the mixer sends feedback when the control is nudged. Serial- ToMixer: Connect to the TCP/IP symbol Transmit line. Reference the dLive protocol for valid Control Channels for the selected control type. For more information Reference: dLive-MIDI-TCP-Protocol-1.50.pdf Tested with dLIve firmware V1.72 Release: 2018-11-14 Release r0.0 *********************************************************************************** AandH Send Level Control-dLive r0.0.usp Controls fader levels on dLive Mixers. Note that not all combinations possible via the configuration of the module are supported by the mixer. Please verify with the documentation. Parameters: InputControlType: Select Input Channel, Mains, Mono Group, Stereo Group, Mono Aux, Stereo Aux, Mono Matrix, Stereo Matrix and FX Return. InputControlChnl: Select valid range from control type in decimal format. InputMidiChnl: The MidiChnl to control in decimal format. OutputControlType: Select Mono Aux, Stereo Aux, Mono Matrix, Stereo Matrix, Mono FX Send and Stereo FX Send. OutputControlChnl: Select valid range from control type in decimal format. OutputMidiChnl: The MidiChnl to control in decimal format. Inputs: Analog- SendLvl: Set the analog to the range of 0d~127d (00h~7Fh). Serial- FmMixer: Connect to the TCP/IP symbol receive line. Outputs: Analog- SendLvlFb: Feedback of the level in the range of 0d~127d (00h~7Fh). This is tracked internally by the module. It is also updated when the mixer sends feedback when the control is nudged. Serial- ToMixer: Connect to the TCP/IP symbol Transmit line. Reference the dLive protocol for valid Control Channels for the selected control type. For more information Reference: dLive-MIDI-TCP-Protocol-1.50.pdf Tested with dLIve firmware V1.72 Release: 2018-11-14 Release r0.0 *********************************************************************************** AandH Scene Control-dLive r0.0.usp Controls Scenes 1d~500d on Midi Channels 1d~16d. Inputs: Digital- Take: Sends the command to the dLive for whichever Scene is currently on the Scene and MidiChnl analogs. Can be latched with a 1 to automatically send whenever the analogs change. Analog- Scene: Scene to recall. Valid range 1-500d. MidiChnl: MidiChnl of the board you wish to control. Valid range 1d-16d. Serial- ToMixer: Connect to the TCP/IP symbol Transmit line. For more information Reference: dLive-MIDI-TCP-Protocol-1.50.pdf Tested with dLIve firmware V1.72 Release: 2018-11-14 Release r0.0 *********************************************************************************** AandH Mute Control-dLive r0.0.usp Controls mutes on dLive Mixers. Parameters: ControlType: Select Input Channel, Mains, Mono Group, Stereo Group, Mono Aux, Stereo Aux, Mono Matrix, Stereo Matrix, Mono FX Send, Stereo FX Send, FX Return, DCA and Mute Group. ControlChnl: Select valid range from control type in decimal format. MidiChnl: The MidiChnl to control in decimal format. Inputs: Digital- MuteOn/Off/Toggle: Pulse to turn mute on/off or toggle state. Serial- FmMixer: Connect to the TCP/IP symbol receive line. Outputs: Digital- MuteOnFb/OffFb: Mute Feedback. This is tracked internally by the module. It is also updated when the mixer sends feedback when the control is nudged. Serial- ToMixer: Connect to the TCP/IP symbol Transmit line. Reference the dLive protocol for valid Control Channels for the selected control type. For more information Reference: dLive-MIDI-TCP-Protocol-1.50.pdf Tested with dLIve firmware V1.72 Release: 2018-11-14 Release r0.0